Volume 51, Iss. 4, 2016

Submitted by admin on Sat, 06/04/2016 - 03:31
Journal of Chemical Technology and Metallurgy
51, Iss. 4, 2016
ISSN 1314-7471 (print)
ISSN 1314-7978 (on line)
EDITOR-IN- CHIEF
Prof. Dr. Bogdana Koumanova
Tel: (+ 359 2) 81 63 302
University of Chemical Technology and Metallurgy
8 Kl. Ohridski, 1756 Sofia, Bulgaria
E-mail: journal@uctm.edu

 
PROCEEDINGS
8th INTERNATIONAL SCIENTIFIC AND
PRACTICAL CONFERENCE
SCIENTIFIC-TECHNICAL PROGRESS
 
IN METALLURGY”
23-24 October, 2015
Temirtau, Kazakhstan

 

Invited Editor
Assoc. Prof. Dr. Sergey N. Lezhnev

 

 

 

 
Dear Readers,
     We are introducing a new issue of the Journal of Chemical Technology and Metallurgy which presents scientific articles of the participants in the 8th International scientific and practical conference “Scientific-technical progress in metallurgy”. The conference was held on October 23-24, 2015 at Karaganda State Industrial University, Kazakhstan.
     President of the Republic of Kazakhstan - Leader of nation Nursultan Nazarbayev in the historical Strategy «Kazakhstan-2050» set the global goals, in the first place, human capital development, staffing priorities of industrial-innovative development of the country, improving the quality of scientific research and innovation.
     To achieve these goals it is required the unification of the triad of education, science and innovation, which is possible only in an atmosphere of mutual understanding, to provide training on international standards, conducting research on modern scientific equipment, close cooperation with industry.
     Key objective of our conference is to find solutions to improve the quality of specialists in the field of engineering and technology and the training of engineers for coming of the Third industrial revolution. We have an exchange of views as in traditional scientific fields that meet the needs of mining, metallurgical, and machine industries, and new fields of research, which marks a revolutionary change in the world. The head of our state in Plan of the nation - 100 concrete steps on the implementation of five institutional reforms makes the task of entering to the top 30 developed countries in the new historical conditions.
     Karaganda State Industrial University is one of the leading universities of Kazakhstan for training of highly qualified specialists for mining and metallurgical complex, energy, construction, transport and engineering industries. The University has trained more than 22 thousand engineers and production managers.
     This International Scientific and Practical Conference aims at identifying promising areas for spiders and their integration with manufacturing for development of metallurgical complex of Kazakhstan. The conference proceedings contain articles of the leading scientists and experts of Kazakhstan, CIS and far abroad related to the development of innovative and knowledge-based technologies, nanomaterials in the field of metallurgy and technology of processing of materials pressure, ecology and protection of environment and improvement of quality of preparation of competitive experts.
     This issue of the journal is published with the support by the Rector of the University of Chemical Technology and Metallurgy, Sofia, Professor Dr. Mitko Georgiev, and the Editor-in-Chief of the Journal of Chemical Technology and Metallurgy, Professor Dr. Bogdana Koumanova, whom I sincerely thank with the hope for further cooperation.
     I wish all the readers of the journal new scientific achievements and realization of their plans and projects.

 

Professor D.Sc. Marat K. Ibatov,
Rector of the Karaganda State Industrial University

 

 

 

Research and development of technology for rolling of high-quality plates of non-ferrous metals and alloys in relief rolls
Abdrakhman Naizabekov, Sergey Lezhnev, Toncho Koinov, Igor Mazur, Evgeniy Panin
 
Distribution of linear pressure of thin-sheet rolling across strip width
Sergey Belskiy, Igor Mazur, Sergey Lezhnev, Evgeniy Panin
 
Deformation, stress and fracturing of steel in the process of flat rolling
Alexandr Bogatov, Henryk Dyja, Danis Nukhov
 
Refinement of the microstructure of steel by cross rolling
Kira Tsay, Alexandr Arbuz, Nazim Gusseynov, Renata Nemkaeva, Nurlan Ospanov, Ivan Krupen`kin
 
Forging of shafts, discs and rings from blanks with inhomogeneous temperature field
Igramotdin Aliev, Yaroslav Zhbankov, Sergey Martynov
 
Parametrical neighborhood modelling of the process of forming the temperature of hot-rolled strip coiling
Anatoly М. Shmyrin, Igor P. Mazur, Valery V. Kavygin, Аlexey G. Yartsev
 
Increase of efficiency of pipe ends upsetting technology by research on metal forming
Mikhail Erpalov
 
The establishment of a correlation of complex criterion with the parameters of rolling technology for reinforcing bars
Olga N. Krivtsova, Nadezhda Yu. Kuzminova, Andrey O. Tolkushkin, Alexandr I. Nasonov
 
Development and research of combined process of equal channel angular pressing - drawing
Andrey Volokitin, Abdrakhman Naizabekov, Alexandr Bogatov, Ivan Leshchev, Vladimir Kozlov
 
Research on obtaining of composite materials based on aluminum matrix
Dmitry Kuis, Alexandr Volochko, Artem Shegidevich, Nikolay Svidunovich
 
Picture of metal flow in the processes of forging of flat workpieces
Konstantin Solomonov, Lyudmila Tishchuk
 
Development and computer modeling of a new forging technology of forgings such as slabs and plates
Andrey Tolkushkin, Evgeniy Panin, Vitaliy Talmazan
 
Plasticity as a physical-chemical process of deformation of crystalline solids
Georgiy Kurapov, Elena Orlova, Irina Volokitina, Auezkhan Turdaliev
 
The method for measuring residual stress in stainless steel pipes
Georgy Shimov, Mikhail Rozenbaum, Alexandr Serebryakov, Andrey Serebryakov
 
Prospects of barium-containing ferroalloys production and application for non-furnace treatment of steel and cast iron
Ivan Ryabchikov, Viktor Kovalev
 
Results of development optimized adaptive ACS on neural network for mining
Mikhail Zarubin
 
Guide for Authors